Appliances Test and Tag Canberra Businesses Rely On
One visit, one process — a visual inspection and electrical properties test that together confirm your equipment is genuinely safe to use.
What Is Appliances Test and Tag?
Appliances test and tag is the process of confirming electrical equipment is safe to use, combining a hands-on visual inspection with electrical properties testing — insulation resistance, earth continuity, and leakage current — in the same visit, under AS/NZS 3760. It's one compliant process, not two separate services.
ACT PRO Services is a Canberra-based provider of data cabling and test and tag safety compliance services, supporting residential, commercial, corporate, and industrial clients across the ACT.
Why both steps happen together
Some of the most serious electrical hazards are visible before they're measurable. A frayed cable or a cracked casing can present a real shock or fire risk even if the equipment still passes an electrical test — which is exactly why AS/NZS 3760 treats the visual check and the electrical test as one combined requirement, not an either-or choice.
We check the physical condition first — casing, cabling, plugs, and the surrounding environment — then move straight into measuring insulation resistance, earth continuity, and leakage current with calibrated equipment. Everything is recorded against a clear pass or fail threshold in the same visit.
What we check and test
Step 1 — visual inspection
- ✓Casing and housing for cracks, damage, or missing covers
- ✓Cables and cords for fraying, cuts, or exposed conductors
- ✓Plugs and sockets for wear, looseness, or damage
- ✓Signs of overheating, such as discolouration or a burning smell
Step 2 — electrical properties testing
- ✓Insulation resistance, checking current isn't leaking where it shouldn't
- ✓Earth continuity, confirming a safe path away from the user
- ✓Leakage current, catching developing insulation failure early
Where we find an issue at either step, we note it clearly in your report and flag whether the equipment is safe to continue using, needs repair, or should be taken out of service immediately.
The standard we test against
All appliances test and tag work follows AS/NZS 3760, the Australian and New Zealand standard covering in-service safety inspection and testing of electrical equipment, setting out the specific tests required, acceptable pass thresholds, and recommended testing intervals based on equipment risk category.
Frequently asked questions
It's the process of checking electrical equipment is safe to use, combining a visual inspection for physical damage with electrical properties testing such as insulation resistance and earth continuity — both done in the same visit as one process, following AS/NZS 3760.
Some hazards, like a frayed cable or cracked casing, are visible before they're measurable and can present a real risk even if the equipment still passes an electrical test. AS/NZS 3760 requires both steps as part of a single compliant test — not one or the other.
It measures an item's insulation resistance, earth continuity, and leakage current using calibrated test equipment, recording specific readings rather than just a pass or fail result.
Costs depend on the number of items being tested and the type of equipment involved. We provide a free quote after understanding your equipment count and site.
Testing frequency depends on the equipment's risk category and operating environment under AS/NZS 3760, ranging from every 3 months for high-risk industrial equipment to annually for general office equipment.
Book an Appointment
Pick a date and time that works for you — we'll confirm by email within minutes.